NTRIP RTK GNSS Reference Station

Access high-precision NTRIP correction data from this permanent base reference station in Mymensingh, Bangladesh.

Base Station Status

Offline
Request for online

High Precision

Access high-precision NTRIP correction data from this permanent base reference station in Mymensingh, Bangladesh.

Precise Point Positioning

The absolute position is determined using the Precise Point Positioning (PPP) method from 24-hour static data.

Geodetic Control Point

Optional base station absolute position determined using the nearby geodetic control point.

High-Precision GNSS with RTK System

Real-Time Kinematic (RTK) is a high-precision positioning technique that leverages the Global Navigation Satellite System (GNSS) to provide centimeter-level accuracy. Unlike standalone GNSS receivers, which can have positional errors ranging from several meters to even tens of meters, RTK systems use a stationary base station and a moving rover to significantly reduce these errors. This makes RTK ideal for applications requiring precise positioning, such as:

  • Surveying and Mapping: Achieving sub-centimeter accuracy for land surveying and topographic mapping.

  • Precision Agriculture: Enabling automated machinery guidance and field mapping with high accuracy.

  • Autonomous Vehicles: Providing real-time positional corrections to enhance navigation and safety.

  • Construction and Infrastructure: Monitoring structural movements and performing accurate site measurements.

  • Geodesy and Research: Collecting accurate geospatial data for scientific studies.

NTRIP Base Station Information

Our NTRIP base station, located in Jatiya Kabi Kazi Nazrul Islam University, Mymensingh, Bangladesh, continuously broadcasts GNSS correction data to improve positioning accuracy. This permanent reference station is designed to offer reliable and consistent data for your RTK applications.

Base Station Details:

  • Location: Latitude (+n): 24° 34′ 52.07391″ Longitude (+e): 90° 22′ 29.22109″ Ell. Height: -23.349 m

  • System: GNSS (supports GPS, GLONASS, Galileo, and BeiDou)

  • Correction Format: RTCM

  • Update Rate: 1 Hz

  • Antenna Type: u-blox GNSS Multiband antenna ANN-MB-00

  • Data Access: Real-Time NTRIP Streaming

Access Credentials

To access the NTRIP correction data, use the following credentials:

  • Caster IP/URL: rtk2go.com

  • Port: 2101

  • Mount Point: JKKNIU-ASL

  • Username: not_required

  • Password: not_required

How to Connect

  1. Install NTRIP Client Software: Use your preferred software. Ex: For android (GNSS Master, SW Maps)

  2. Configure Connection Settings: Enter the caster IP, port, mount point, username, and password.

  3. Connect to the Base Station: Once connected, your device will start receiving correction data in real-time.

  4. Verify Accuracy: Check your rover’s position accuracy to ensure stable and precise corrections.

Important Notes

  • Make sure your GNSS receiver supports RTCM correction formats.

  • Ensure a stable internet connection during operation to maintain continuous data streaming.

By connecting to our NTRIP base station, you can significantly enhance the positional accuracy of your GNSS system, ensuring reliable and precise data for your high-precision applications.JKKNIU-ASL